Practice Test Geeks(CLC) Certified Lighting Consultant Practice Test
← All CLC Flashcard Decks

Commercial & Retail Lighting Flashcards

7 cards from real CLC practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Commercial & Retail Lighting flashcards as text

  1. A clothing boutique wants to use 3000K LED fixtures. How does this CCT choice affect the mood of the space?

    Answer: Produces a warm, inviting ambiance that flatters skin tones

    3000K is a warm white CCT that creates a welcoming environment and flatters skin tones, which is ideal for apparel retail.

  2. What is 'glare' in commercial lighting, and why is it a concern in office environments?

    Answer: Excessive brightness or contrast that causes discomfort and reduces visibility

    Glare occurs when excessive luminance or contrast in the field of view causes discomfort or reduces the ability to see fine detail, degrading task performance.

  3. In a commercial lobby, a lighting designer specifies a higher illuminance level at the entrance than in the corridors. What design principle does this follow?

    Answer: Transition zones and adaptation lighting

    Transition zones use graduated illuminance to allow the human eye to adapt gradually between exterior brightness and interior levels, preventing discomfort.

  4. Which ASHRAE/IES standard governs energy limits for commercial interior lighting in the United States?

    Answer: ASHRAE 90.1

    ASHRAE 90.1 (Energy Standard for Buildings Except Low-Rise Residential Buildings) establishes lighting power density (LPD) limits for commercial interiors.

  5. A retail store uses track lighting with 15° beam angle spotlights over a mannequin display 3 meters away. What effect will the narrow beam produce?

    Answer: Tight, dramatic highlight concentrated on the mannequin

    A 15° beam angle creates a tight, concentrated pool of light that dramatically highlights the mannequin and increases the contrast ratio between display and surround.

  6. What is 'maintained illuminance' as used in commercial lighting design?

    Answer: The average illuminance at the end of the maintenance cycle, accounting for depreciation

    Maintained illuminance accounts for light loss factors (lamp lumen depreciation, dirt, etc.) to ensure minimum required levels are met throughout the maintenance interval.

  7. In a large-format retail store, ceiling heights reach 6 meters. Which luminaire type is best suited to deliver adequate illuminance to the floor?

    Answer: High-bay LED luminaire with appropriate optics

    High-bay LED luminaires are specifically designed for mounting heights above 4–5 meters, providing the optical control needed to deliver sufficient lux at floor level.