Practice Test Geeks(CLC) Certified Lighting Consultant Practice Test
← All CLC Flashcard Decks

Codes, Standards & Safety Compliance Flashcards

7 cards from real CLC practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Codes, Standards & Safety Compliance flashcards as text

  1. A lighting consultant is specifying fixtures for a hospital operating room. Which IES document provides the primary recommended illuminance levels for this critical care space?

    Answer: IES RP-29 (Lighting for Hospitals and Healthcare Facilities)

    IES RP-29 provides recommended illuminance levels and quality criteria specifically for hospitals and healthcare facilities, including surgical and examination areas.

  2. The California Title 24 'Nonresidential Compliance Manual' prescribes a maximum Lighting Power Density for an open office plan. Which compliance method allows a designer to exceed the base LPD by claiming a 'luminaire controls credit'?

    Answer: The Complete Buildings method with a controls adjustment factor

    Title 24 allows controls adjustment factors that can increase the allowable LPD when advanced daylighting or occupancy controls exceeding minimum requirements are installed.

  3. Under NFPA 70E (Electrical Safety in the Workplace), a lighting contractor performing live-circuit work must establish an Electrically Safe Work Condition or, if energized work is justified, implement which control?

    Answer: An Energized Electrical Work Permit and appropriate PPE

    NFPA 70E requires an Energized Electrical Work Permit and proper arc-flash-rated PPE whenever live electrical work cannot be de-energized.

  4. The FTC 'Green Guides' are relevant to a lighting consultant specifying products because they govern:

    Answer: Truthfulness of environmental marketing claims such as 'energy-saving' and 'eco-friendly'

    The FTC Green Guides (16 CFR Part 260) set standards for substantiating environmental marketing claims to prevent deceptive labeling like unqualified 'green' or 'eco-friendly' assertions.

  5. ASHRAE 90.1-2019 introduced a new requirement for exterior lighting. Which specific change most directly affects parking lot lighting design?

    Answer: Mandatory motion-sensor or schedule-based shutoff or reduction for parking lots during unoccupied periods

    ASHRAE 90.1-2019 requires exterior lighting, including parking lots, to have automatic controls that reduce or shut off lighting during low-occupancy or scheduled off hours.

  6. Which federal agency administers the Toxic Substances Control Act (TSCA), which affects the disposal of fluorescent lamps containing mercury?

    Answer: U.S. Environmental Protection Agency (EPA)

    The EPA administers TSCA and oversees the proper management and disposal of hazardous substances including mercury-containing lamps under Universal Waste rules.

  7. In a retail store project, the lighting designer needs to document compliance with IECC 2021. Which of the following is NOT a compliant method for interior lighting power compliance?

    Answer: Specifying fixtures by brand preference without calculating wattage totals

    Brand preference alone is never a compliance pathway; the designer must demonstrate compliance via the building area method, space-by-space method, or an approved alternate standard.