Tool Maintenance & Workshop Management Flashcards
7 cards from real CLC practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Tool Maintenance & Workshop Management flashcards as text
Which OSHA standard primarily governs lockout/tagout procedures in a carpentry workshop?
Answer: 29 CFR 1910.147
29 CFR 1910.147 (Control of Hazardous Energy) establishes lockout/tagout requirements to prevent unexpected energization of machinery during service.
When setting up a router table fence, the infeed and outfeed fence sections should be:
Answer: Both sections set flush with each other and tangent to the bit's cutting arc
For most router table operations both fence faces are coplanar and tangent to the bit's outermost cutting radius, providing consistent support throughout the cut.
A table saw's blade guard and splitter (riving knife) primarily protect against:
Answer: Kickback and blade contact
The splitter keeps the kerf open to prevent the wood from pinching the blade and causing kickback, while the guard covers the exposed blade teeth.
What does a torque specification on a fastener indicate for tool maintenance purposes?
Answer: The rotational force required to achieve proper clamping without stripping
Torque specifications define the clamping force needed so that fasteners are tight enough to function properly without being over-tightened and stripped.
When grinding a chisel bevel on a bench grinder, overheating the steel is dangerous because it:
Answer: Draws the temper, permanently softening the cutting edge
Excessive heat from grinding destroys the heat treatment (temper) of the steel, leaving a soft edge that dulls rapidly and cannot hold a keen edge.
What is the primary function of anti-kickback pawls on a table saw?
Answer: They grip the workpiece and prevent it from being thrown back toward the operator
Anti-kickback pawls have angled teeth that dig into the workpiece if it reverses direction, stopping it before it can be violently ejected toward the operator.
Which action extends the life of a router bit most effectively?
Answer: Cleaning pitch buildup regularly and avoiding full-depth climb cuts
Pitch and resin buildup cause heat and friction that dull edges prematurely; multiple shallow passes and avoiding climb cuts reduce stress on the cutting edges.