Quality Inspection & Punch Lists Flashcards
7 cards from real CLC practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Quality Inspection & Punch Lists flashcards as text
When performing a rough framing inspection before insulation, what is the standard maximum allowable bow or crown in a wall stud for a quality framing check?
Answer: 1/2 inch per 8 feet
Industry standards generally allow up to 1/2" of bow or crown per 8 feet of stud length for wall framing to remain within tolerance.
A lead carpenter is verifying the quality of caulk joints around a bathtub. Which sign indicates the caulk will fail prematurely and should be flagged?
Answer: Caulk is applied over an existing layer of old caulk without removal
Caulk applied over existing caulk without full removal will not bond properly to the substrate, leading to premature adhesion failure and water infiltration.
Which of the following is the CORRECT sequence for conducting a multi-trade punch list walkthrough?
Answer: Start from the top floor and work down, room by room
Starting from the top floor and working down room by room ensures systematic coverage and prevents re-tracking through completed areas.
During a kitchen cabinet installation inspection, a lead carpenter checks for racking in the cabinet boxes. What does 'racking' mean in this context?
Answer: The cabinet box is out of square, with corners not at 90°
Racking refers to a cabinet box that has been distorted out of square, meaning the corners are not at 90°, which causes doors and drawers to hang improperly.
What is the purpose of a 'mock-up' inspection in a high-quality finish carpentry project?
Answer: To establish a quality standard sample for the client and crew to reference
A mock-up is a sample installation that the client approves, establishing the agreed-upon quality standard that all subsequent work is measured against.
A lead carpenter notices that newly painted walls show roller stipple texture in raking light. This issue is most likely caused by:
Answer: Insufficient surface preparation or using the wrong nap roller cover
Roller stipple or 'orange peel' texture in finished paint work is typically caused by using a roller with too heavy a nap or applying paint to an improperly prepared surface.
When inspecting exterior trim for quality, what is the minimum recommended overlap of horizontal lap siding over a window or door flashing?
Answer: 1/2 inch
A minimum 1/2" overlap of siding over flashing at window and door heads is required to ensure proper water shedding and prevent infiltration behind the siding.