Quality Inspection & Punch Lists Flashcards
7 cards from real CLC practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Quality Inspection & Punch Lists flashcards as text
When inspecting flooring transitions between rooms, what is the acceptable maximum height difference per ADA guidelines for accessible construction?
Answer: 1/4 inch vertical, 1/2 inch beveled
ADA guidelines allow a maximum 1/4" vertical change in level, or up to 1/2" if beveled at a 1:2 slope.
A client reports that newly installed hardwood flooring has developed squeaks after one week. The most probable cause a lead carpenter should inspect for is:
Answer: Flooring was not acclimated to the space before installation
Hardwood flooring that was not properly acclimated will expand or contract after installation, causing movement at fastener points and resulting in squeaks.
During a final quality inspection, which tool would a lead carpenter use to check that a countertop surface is flat within acceptable tolerances?
Answer: 4-foot level or straightedge
A 4-foot level or straightedge laid across the countertop surface reveals high and low spots that indicate flatness deviations.
Which punch list notation best communicates an issue to a subcontractor who was not present at the inspection?
Answer: 'Bedroom 2 closet: base trim at north wall has 3/8" gap at inside corner — caulk and repaint'
Specific punch list items include location, exact deficiency, and required corrective action to eliminate ambiguity for subcontractors.
A lead carpenter is reviewing tile installation in a shower. What is the acceptable grout joint variation for a quality installation using 4x4 tiles?
Answer: Up to 1/16" variation in joint width is generally acceptable
Industry standards allow up to approximately 1/16" variation in grout joint width for smaller tiles; larger variation indicates poor layout or inconsistent tile sizing.
What does the term 'substantial completion' mean in the context of a construction punch list?
Answer: The work is complete enough for the owner to use the space for its intended purpose
Substantial completion means the project is sufficiently complete for occupancy or use for its intended purpose, even if minor punch list items remain.
During a window installation inspection, a lead carpenter notices condensation forming between the glass panes of a double-pane window. This indicates:
Answer: The insulated glass unit seal has failed
Condensation between double-pane glass indicates the hermetic seal of the insulated glass unit (IGU) has failed, allowing moist air to enter the sealed cavity.