Practice Test Geeks(CLC) Certified Lead Carpenter Practice Test
← All CLC Flashcard Decks

Blueprint Reading & Technical Specifications Flashcards

7 cards from real CLC practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Blueprint Reading & Technical Specifications flashcards as text

  1. A specification calls for fasteners 'per ICC ESR-1254.' What is an ICC ESR report?

    Answer: An evaluation service report confirming a product's code compliance

    An ICC Evaluation Service Report (ESR) is a published technical document verifying that a proprietary product meets applicable building code requirements.

  2. On a structural detail, a circle with a letter inside placed on a beam line indicates:

    Answer: A column grid reference point

    A circle enclosing a letter or number on a structural drawing references a specific column grid line established on the framing or foundation plan.

  3. When a specification references ASTM A153, what type of product quality standard is being cited?

    Answer: A zinc coating standard for hot-dip galvanized hardware

    ASTM A153 is the Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware, ensuring corrosion resistance of fasteners and connectors.

  4. On a floor plan, what does a thin line with a 'X' through a rectangular space indicate?

    Answer: A glazed opening such as a window or curtain wall

    An X drawn within a rectangular outline on a floor plan is the standard symbol for a window or other glazed opening in a wall.

  5. What does 'FF&E' refer to in construction and specification documents?

    Answer: Furniture, Fixtures, and Equipment

    FF&E stands for Furniture, Fixtures, and Equipment—items that are movable or not permanently built into the structure and are often specified separately.

  6. A drawing note states 'SIM.' next to a detail callout. What does 'SIM.' mean in this context?

    Answer: Similar — the referenced detail applies in a comparable way at this location

    'SIM.' means Similar, indicating that the referenced detail applies at this location with only minor differences not worth drawing separately.

  7. On a framing plan, what does 'BRG. HT.' typically indicate?

    Answer: Bearing Height — the elevation at which a beam or wall plate bears on its support

    BRG. HT. stands for Bearing Height, specifying the elevation at which a structural member rests on its support, critical for aligning floor and wall framing.