Workplace Safety Principles Flashcards
7 cards from real CLA practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Workplace Safety Principles flashcards as text
What is the OSHA requirement for forklift operator re-evaluation?
Answer: When the operator is observed operating unsafely, after an accident, or when new equipment or conditions arise
OSHA 29 CFR 1910.178(l) requires re-evaluation when unsafe operation is observed, after an accident or near miss, or when operating conditions change.
Which of the following is a leading indicator of workplace safety performance?
Answer: Percentage of safety observations completed this week
Leading indicators measure proactive safety activities (like observations and training) that predict future performance, unlike lagging indicators that measure past incidents.
What is the primary purpose of a Material Safety Data Sheet (now called SDS) in a logistics environment?
Answer: To provide hazard information and safe handling instructions for chemical substances
The SDS communicates chemical hazard information and safe handling, storage, disposal, and emergency response procedures to workers.
In the context of warehouse safety, what does 'housekeeping' refer to?
Answer: Maintaining orderly, clean, and organized work areas to prevent hazards
Good housekeeping means maintaining clean, clutter-free workspaces which reduces slip, trip, and fall hazards and improves overall safety.
When should a pre-operation inspection of a forklift be conducted?
Answer: At the beginning of each shift before use
OSHA requires forklift pre-operation inspections at the start of each shift to identify defects before they cause accidents.
What is the correct procedure when a forklift is found to be defective during an inspection?
Answer: Tag it out of service and report it to a supervisor immediately
Defective forklifts must be immediately removed from service and tagged to prevent use until properly repaired, per OSHA 29 CFR 1910.178.
Which of the following personal protective equipment (PPE) is most commonly required in a general warehouse environment?
Answer: Safety-toed footwear and high-visibility vest
Safety-toed footwear protects against falling objects and forklift traffic, while high-visibility vests ensure workers can be seen by equipment operators.