CITB Building Regulations and Standards 2

Question 1

Under Building Regulations, which document sets out the minimum requirements for the thermal performance of new buildings?

Accepted Answer

Approved Document L

Answer

Approved Document L (Conservation of Fuel and Power) sets minimum thermal performance requirements for new and existing buildings.

Question 2

What is the primary purpose of a site inspection by a Building Control Officer during construction?

Accepted Answer

To verify compliance with approved Building Regulations

Answer

Building Control Officers inspect sites to verify that work is being carried out in accordance with the approved Building Regulations.

Question 3

Which regulation requires that all new dwellings have adequate means of ventilation to prevent condensation and maintain air quality?

Accepted Answer

Approved Document F

Answer

Approved Document F (Ventilation) requires new dwellings to have adequate means of ventilation to maintain air quality and prevent condensation.

Question 4

A builder completes work without a required Building Regulations approval. What is the maximum period during which the local authority can take enforcement action for most contraventions?

Accepted Answer

2 years

Answer

Local authorities can generally take enforcement action within 2 years of the completion of unauthorized building work.

Question 5

Under Approved Document M (Access to and Use of Buildings), what minimum clear door opening width is required for new dwellings to allow wheelchair access?

Accepted Answer

775mm

Answer

Approved Document M requires a minimum 775mm clear opening width for doors in new dwellings to facilitate wheelchair access.

(CITB) Construction Industry Training Board Practice Test

(CITB) Construction Industry Training Board Practice Test

CITB Building Regulations and Standards 2