Practice Test GeeksCITB HS&E Operatives Practice Test
← All CITB Flashcard Decks

Hazardous Substances (COSHH) Flashcards

6 cards from real CITB practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 Hazardous Substances (COSHH) flashcards as text

  1. What is the workplace exposure limit (WEL) used for?

    Answer: To set the maximum concentration of an airborne substance workers can be exposed to over a defined period

    Workplace Exposure Limits (WELs) are set by HSE in EH40 and define the maximum concentration of an airborne hazardous substance (averaged over 8 hours or 15 minutes for short-term limits) that workers should not exceed.

  2. What health risk is associated with prolonged exposure to silica dust on construction sites?

    Answer: Silicosis, a serious and incurable lung disease

    Respirable crystalline silica (RCS) dust, generated by cutting, drilling, or grinding concrete, brick, or stone, causes silicosis — irreversible scarring of lung tissue. It also significantly increases the risk of lung cancer. The WEL for RCS is 0.1 mg/m³.

  3. How should hazardous substances be stored on a construction site?

    Answer: In a secure, ventilated area away from ignition sources with appropriate signage

    Hazardous substances must be stored in a secure, well-ventilated area away from ignition sources, incompatible materials, and drainage. The storage area should have appropriate signage, spillage containment (bunding), and SDS sheets readily available.

  4. What should you do if a hazardous substance is accidentally spilled on your skin?

    Answer: Immediately wash the affected area with plenty of clean water and seek medical advice

    If a hazardous substance contacts your skin, you should immediately remove contaminated clothing and wash the affected area thoroughly with plenty of clean water. Seek medical advice promptly. Delays can result in chemical burns, dermatitis, or absorption through the skin.

  5. What does LEV stand for in the context of controlling hazardous substances?

    Answer: Local Exhaust Ventilation

    Local Exhaust Ventilation (LEV) is an engineering control that captures airborne contaminants (dust, fumes, vapours) at or near their source before they spread into the workplace air. Examples include on-tool extraction on cutting equipment and fume extraction hoods.

  6. Asbestos is most dangerous when it is in which condition?

    Answer: When it is dry, damaged, or disturbed and fibres become airborne

    Asbestos is most dangerous when its fibres become airborne, which happens when asbestos-containing materials are damaged, deteriorated, or disturbed (cut, drilled, broken). Inhaled asbestos fibres cause mesothelioma, asbestosis, and lung cancer — all with long latency periods.