← All CITB Flashcard Decks

Fire Prevention and Emergency Flashcards

6 cards from real CITB practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 Fire Prevention and Emergency flashcards as text
  1. What are the three elements of the fire triangle?

    Answer: Heat, fuel, and oxygen

    The fire triangle consists of heat (ignition source), fuel (combustible material), and oxygen (from air). A fire cannot start or continue to burn without all three elements present. Removing any one element will extinguish the fire.

  2. What colour is a water fire extinguisher?

    Answer: Red with no colour band

    A water fire extinguisher is all red (signal red) with no additional colour band or label. Water extinguishers are suitable for Class A fires (solid materials such as wood, paper, and textiles) but must NEVER be used on electrical or flammable liquid fires.

  3. On discovering a fire on a construction site, what is the correct order of actions?

    Answer: Raise the alarm, evacuate to the assembly point, call the fire service

    The correct procedure is: raise the alarm immediately (shout 'Fire!' and activate the nearest call point), evacuate via the nearest safe route to the designated assembly point, and call the emergency services (999). Only attempt to fight a small fire if trained and it is safe to do so.

  4. A CO2 fire extinguisher (black band) is most suitable for which type of fire?

    Answer: Electrical equipment fires and flammable liquid fires

    CO2 (carbon dioxide) extinguishers, identified by a black band, are ideal for electrical fires and flammable liquid fires (Class B). The CO2 displaces oxygen without leaving residue that could damage electrical equipment. They should not be used in confined spaces.

  5. What is a 'hot work permit' required for?

    Answer: Work involving open flames, welding, cutting, or grinding that could start a fire

    A hot work permit is a formal document required before carrying out any work that produces sparks, flames, or heat — such as welding, cutting, brazing, or grinding. It ensures fire precautions are in place, including fire watch, extinguishers, and clearing combustible materials.

  6. How often should fire escape routes on a construction site be checked?

    Answer: Daily — they must be kept clear and unobstructed at all times

    Fire escape routes must be checked daily and kept clear and unobstructed at all times during working hours. On construction sites, routes can quickly become blocked by materials, equipment, or debris, so regular checks are essential to ensure safe evacuation.