Building Regulations and Standards Flashcards
7 cards from real CITB practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Building Regulations and Standards flashcards as text
Which Approved Document sets requirements for the provision of sanitary conveniences and washing facilities in buildings?
Answer: Approved Document G
Approved Document G (Sanitation, Hot Water Safety and Water Efficiency) covers requirements for sanitary conveniences and washing facilities.
What does the term 'Regulation 7' specifically refer to in the Building Regulations?
Answer: The proper use and adequacy of materials
Regulation 7 requires that building work is carried out with proper materials that are fit for purpose and used in a workmanlike manner.
Under Building Regulations, which document provides guidance on the safe installation of combustion appliances and fuel storage?
Answer: Approved Document J
Approved Document J (Combustion Appliances and Fuel Storage Systems) covers the safe installation of boilers, stoves, and fuel storage.
A Building Regulations Full Plans application differs from a Building Notice primarily because it:
Answer: Allows detailed plans to be approved before work starts
A Full Plans application involves submitting detailed drawings for approval before work begins, giving certainty that the design meets requirements.
Which Approved Document covers drainage and waste disposal requirements for new buildings?
Answer: Approved Document H
Approved Document H covers the design and installation of drainage and waste disposal systems, including foul water and surface water drainage.
What is the purpose of a Pre-Application advice service offered by local building control teams?
Answer: To provide regulatory guidance before a formal application is submitted
Pre-Application advice allows applicants to receive guidance on compliance issues before formally submitting a Building Regulations application.
Under Part P of the Building Regulations, which of the following electrical work in a home MUST be notified to building control?
Answer: Installing a new consumer unit
Installing a new consumer unit (fuse box) is notifiable work under Part P and must be carried out by a competent person or notified to building control.