Practice Test Geeks(CITB) Construction Industry Training Board Practice Test
← All CITB Flashcard Decks

Building Regulations and Standards Flashcards

7 cards from real CITB practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Building Regulations and Standards flashcards as text

  1. Under Building Regulations, which document sets out the minimum requirements for the thermal performance of new buildings?

    Answer: Approved Document L

    Approved Document L (Conservation of Fuel and Power) sets minimum thermal performance requirements for new and existing buildings.

  2. What is the primary purpose of a site inspection by a Building Control Officer during construction?

    Answer: To verify compliance with approved Building Regulations

    Building Control Officers inspect sites to verify that work is being carried out in accordance with the approved Building Regulations.

  3. Which regulation requires that all new dwellings have adequate means of ventilation to prevent condensation and maintain air quality?

    Answer: Approved Document F

    Approved Document F (Ventilation) requires new dwellings to have adequate means of ventilation to maintain air quality and prevent condensation.

  4. A builder completes work without a required Building Regulations approval. What is the maximum period during which the local authority can take enforcement action for most contraventions?

    Answer: 2 years

    Local authorities can generally take enforcement action within 2 years of the completion of unauthorized building work.

  5. Under Approved Document M (Access to and Use of Buildings), what minimum clear door opening width is required for new dwellings to allow wheelchair access?

    Answer: 775mm

    Approved Document M requires a minimum 775mm clear opening width for doors in new dwellings to facilitate wheelchair access.

  6. Which Approved Document covers the structural stability requirements for walls, floors, and roofs?

    Answer: Approved Document A

    Approved Document A (Structure) covers structural stability requirements including the design of walls, floors, and roofs.

  7. When is a Completion Certificate issued to a building owner under the Building Regulations?

    Answer: After all required inspections are completed and work is deemed compliant

    A Completion Certificate is issued after all required building control inspections have been completed and the work is found to comply with Building Regulations.