CIT - Certified Irrigation Technician Irrigation Principles and Components 2

Question 1

A rotary sprinkler head is most appropriate for which type of irrigation application?

Accepted Answer

Large turf areas over 25 feet in any direction

Answer

Rotary sprinkler heads (rotors) are designed for medium to large turf areas, typically throwing water 25-50+ feet. Their slower precipitation rate (compared to spray heads) makes them ideal for slopes and clay soils, reducing runoff potential.

Question 2

What is the purpose of a check valve (CV) built into a sprinkler head or at the base of a riser?

Accepted Answer

To prevent low-head drainage — water draining from sprinkler heads at the lowest point on a zone after the valve closes

Answer

A check valve in a sprinkler head prevents low-head drainage, where water drains from the lateral pipe through the lowest heads on the zone after the zone valve closes. This wastes water, erodes soil around low heads, and leaves pipes empty (causing delayed startup).

Question 3

Matched Precipitation Rate (MPR) nozzles are important because they ensure that:

Accepted Answer

Full-circle, half-circle, and quarter-circle heads all apply water at the same rate per unit area

Answer

MPR nozzles ensure that heads with different arc settings (90, 180, 270, 360 degrees) apply water at the same precipitation rate. A quarter-circle head uses less flow than a half-circle head, which uses less than a full-circle head, keeping the precipitation rate uniform.

Question 4

A swing joint assembly connecting a sprinkler head to the lateral pipe serves what primary purposes?

Accepted Answer

To allow height adjustment and provide flexible connection that absorbs impact and ground movement

Answer

Swing joints use threaded fittings and flexible risers to allow height adjustment of the sprinkler head and absorb impacts from mowers, foot traffic, and soil settling without breaking the lateral pipe connection.

Question 5

The precipitation rate of a sprinkler head is defined as:

Accepted Answer

The depth of water applied per unit of time, typically measured in inches per hour

Answer

Precipitation rate is the depth of water applied over an area per unit of time, measured in inches per hour. It determines how long each zone must run to apply the required depth of water and must be matched to the soil's infiltration rate to prevent runoff.

CIT - Certified Irrigation Technician Practice Test

CIT - Certified Irrigation Technician Practice Test

CIT - Certified Irrigation Technician Irrigation Principles and Components 2