Chauffeur License Vehicle Inspection & Documentation 2 — Questions and Answers
Question 1: When inspecting a chauffeur vehicle's braking system, which component stores pressurized fluid that assists brake application?
- Master cylinder reservoir
- Brake booster accumulator (Correct answer)
- ABS control module
- Caliper bleeder valve
Correct answer: Brake booster accumulator
The brake booster accumulator stores pressurized hydraulic or vacuum-assisted fluid to aid brake pedal force.
Question 2: A chauffeur notices the vehicle's power steering fluid is dark brown and has a burnt smell. The correct action is to:
- Add fresh fluid on top of the old fluid
- Flush and replace the power steering fluid before service (Correct answer)
- Continue operating since color doesn't affect function
- Only replace if steering feels stiff
Correct answer: Flush and replace the power steering fluid before service
Dark, burnt-smelling power steering fluid indicates degraded fluid that should be flushed and replaced to prevent pump and rack damage.
Question 3: Which document must a chauffeur carry to prove the vehicle meets federal emission standards for commercial use?
- Insurance binder
- Certificate of inspection
- Vehicle emission test report (Correct answer)
- DOT medical certificate
Correct answer: Vehicle emission test report
A vehicle emission test report certifies that the vehicle meets applicable federal and state emission standards required for commercial operation.
Question 4: During a pre-trip inspection, a chauffeur finds a small crack in the windshield outside the driver's direct line of sight. What should the driver do?
- Apply clear tape and proceed to service
- Report it and schedule repair before next trip if regulations require (Correct answer)
- Ignore it since it is outside the line of sight
- Cover it with a sticker
Correct answer: Report it and schedule repair before next trip if regulations require
Any windshield crack must be reported and assessed against local regulations; many jurisdictions require repair before the vehicle returns to service.
Question 5: What is the primary purpose of the vehicle identification number (VIN) on a chauffeur vehicle's registration documents?
- To record fuel consumption history
- To uniquely identify the vehicle and verify it matches registration (Correct answer)
- To track service appointment dates
- To list the vehicle's approved passenger capacity
Correct answer: To uniquely identify the vehicle and verify it matches registration
The VIN uniquely identifies the specific vehicle and must match across the title, registration, and insurance documents to verify legitimacy.
Question 6: A chauffeur's vehicle has a For-Hire placard that expired last week. The driver should:
- Continue operating since plates are current
- Remove the placard and operate without it
- Renew the placard before carrying passengers for hire (Correct answer)
- Use the placard until a passenger complains
Correct answer: Renew the placard before carrying passengers for hire
An expired For-Hire placard means the vehicle is not legally authorized to carry paying passengers and must be renewed before resuming service.
Question 7: When checking a limousine's sunroof before a trip, what specific safety concern should the chauffeur verify?
- That the sunroof tint matches the windows
- That the sunroof seal is intact and the mechanism opens and closes fully without obstruction (Correct answer)
- That the sunroof is left open for passenger comfort
- That the sunroof motor draws minimal current
Correct answer: That the sunroof seal is intact and the mechanism opens and closes fully without obstruction
The chauffeur must confirm the sunroof seal is leak-free and the mechanism functions fully to prevent water intrusion and ensure passenger safety.
Chauffeur License Vehicle Inspection & Documentation 2
When inspecting a chauffeur vehicle's braking system, which component stores pressurized fluid that assists brake application?