CH Clinical Procedures & Protocols 3

Question 1

What is the correct sequence for cleaning and sterilizing reusable colonic equipment between clients?

Accepted Answer

Pre-clean to remove debris, then disinfect with an approved EPA-registered disinfectant or autoclave

Answer

Effective sterilization requires removing gross debris first so disinfectants or autoclaving can reach all surfaces.

Question 2

A client discloses they had a colonoscopy 5 days ago. What is the appropriate clinical decision?

Accepted Answer

Postpone the session until the physician's recommended recovery window has passed

Answer

Recent colonoscopy creates risk of mucosal trauma and perforation; the client must be fully recovered and medically cleared before receiving colonics.

Question 3

During water infusion, the therapist notices the outflow tube is showing no return flow despite water continuing to enter. What should the therapist do first?

Accepted Answer

Immediately stop inflow, release pressure, and check for speculum displacement or obstruction

Answer

Absent outflow with continued inflow can cause dangerous intraluminal pressure; stopping and assessing is the safe first response.

Question 4

Which electrolyte imbalance is of greatest concern following multiple or lengthy colonic sessions?

Accepted Answer

Hyponatremia (low sodium)

Answer

Repeated colonic irrigation can flush sodium from the colon, leading to hyponatremia, which can cause neurological symptoms in severe cases.

Question 5

A therapist is preparing filtered water for a colonic session. The water temperature should be maintained closest to which range?

Accepted Answer

98–102°F (37–39°C)

Answer

Water at body temperature (approximately 98–102°F) minimizes thermal shock to the bowel and maintains client comfort.

(CH) Colonic Hydrotherapist Certification Practice Test

(CH) Colonic Hydrotherapist Certification Practice Test

CH Clinical Procedures & Protocols 3