Practice Test Geeks(CFS) Certified Fastener Specialist Practice Test
← All CFS Flashcard Decks

Industry Standards & Regulations Flashcards

7 cards from real CFS practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Industry Standards & Regulations flashcards as text

  1. Which ASME standard governs the dimensional requirements for hex cap screws used in pressure vessels?

    Answer: ASME B18.2.1

    ASME B18.2.1 specifies dimensional requirements for inch series square and hex bolts and screws, including hex cap screws.

  2. Under ASTM F3125, which grade designation covers structural bolts with a minimum tensile strength of 150 ksi?

    Answer: Grade A490

    ASTM F3125 Grade A490 structural bolts have a minimum tensile strength of 150 ksi, making them the higher-strength option compared to A325.

  3. What does the RoHS Directive restrict in fastener manufacturing?

    Answer: Use of certain hazardous substances including lead and cadmium

    The EU RoHS Directive restricts the use of specific hazardous substances such as lead, mercury, cadmium, and hexavalent chromium in electrical and electronic equipment, including fasteners used in such products.

  4. Which standard specifies minimum performance requirements for self-drilling screws?

    Answer: SAE J78

    SAE J78 specifies performance requirements for steel self-drilling tapping screws, including drill point performance and thread-forming capability.

  5. In the context of REACH regulation, what must fastener manufacturers do if their product contains a SVHC above 0.1% by weight?

    Answer: Notify customers and provide safe use information

    Under REACH, if a fastener article contains a Substance of Very High Concern (SVHC) above 0.1% w/w, the supplier must notify customers and provide safe use information upon request.

  6. Which ISO standard establishes the property classes for metric steel bolts and screws?

    Answer: ISO 898-1

    ISO 898-1 specifies mechanical and physical properties for metric fasteners made of carbon and alloy steel, defining property classes such as 8.8, 10.9, and 12.9.

  7. What is the primary purpose of ASTM F606 in the fastener industry?

    Answer: To define test methods for determining mechanical properties of externally threaded fasteners

    ASTM F606 establishes standard test methods for determining the mechanical properties of externally and internally threaded fasteners, washers, and rivets.