CFPS - Certified Fire Protection Specialist Detection and Alarm Systems Questions and Answers 1

Question 1

A fire protection specialist is designing a detection system for a mission-critical data center with high airflow from cooling systems. To provide the earliest possible warning of a fire, which type of smoke detection system is MOST appropriate?

Accepted Answer

Air-sampling (aspirating) smoke detectors

Answer

High airflow can dilute smoke, delaying activation of spot-type detectors. Air-sampling (aspirating) smoke detection (ASD) systems actively draw air from the protected space through a pipe network and analyze it in a central detection unit. This method provides very early warning even in high-airflow environments where smoke is dispersed.

Question 2

According to NFPA 72, National Fire Alarm and Signaling Code, what is the primary factor that determines the required candela rating and spacing of wall-mounted visible notification appliances (strobes) in a room?

Accepted Answer

The size and dimensions of the room

Answer

NFPA 72, Chapter 18, provides specific tables (e.g., Table 18.5.4.3.1(a)) that correlate the required candela rating of a wall-mounted strobe to the dimensions (length and width) of the room it is intended to cover. This ensures the light output is sufficient to alert occupants throughout the space.

Question 3

A large university maintains its own 24/7 dispatch center staffed by university employees who are responsible for monitoring all campus building fire alarm systems and dispatching the university's emergency responders. According to NFPA 72, how would this type of supervising station be classified?

Accepted Answer

Proprietary Supervising Station

Answer

A proprietary supervising station is defined by NFPA 72 as a facility that monitors protected premises under a single ownership and is continuously staffed by the owner's employees. Since the university owns the buildings and operates the monitoring center with its own staff, it fits this classification.

Question 4

During an annual fire alarm test, a technician activates a smoke detector in a hospital. The fire alarm control unit (FACU) immediately displays the message: "Smoke Detector - 3rd Floor, Room 314." This capability is a key feature of which type of system?

Accepted Answer

An addressable-intelligent system

Answer

Addressable-intelligent fire alarm systems assign a unique digital address to each initiating device (like a smoke detector). When a device activates, it communicates its specific identity and location to the control panel, allowing for precise identification. A conventional system would only identify the general zone or circuit, not the individual device.

Question 5

Which type of automatic fire detector is specifically designed to detect the radiant energy emitted by a fire and is best suited for protecting high-ceiling spaces or areas where fast-flaming fires from liquid fuels are expected, such as an aircraft hangar?

Accepted Answer

Flame detector (UV/IR)

Answer

Flame detectors respond to the specific optical radiant energy, such as ultraviolet (UV) or infrared (IR), emitted by flames. This allows for very rapid detection, especially in large-volume spaces with high ceilings where heat and smoke may take a long time to reach the ceiling, or in areas with fast-developing flammable liquid fires.

CFPS (Certfied Fire Protection Specialist) Practice Test

CFPS (Certfied Fire Protection Specialist) Practice Test

CFPS - Certified Fire Protection Specialist Detection and Alarm Systems Questions and Answers 1