Fire Prevention Programs Flashcards
7 cards from real CFPS practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Fire Prevention Programs flashcards as text
An industrial facility stores flammable liquids in quantities exceeding the Maximum Allowable Quantity (MAQ). According to fire codes, this MOST likely requires the facility to be classified as:
Answer: A Group H (High-Hazard) occupancy with corresponding construction and separation requirements
Quantities exceeding the MAQ trigger High-Hazard (Group H) occupancy classification, which imposes strict construction, separation, and suppression requirements.
In a healthcare occupancy, fire drills are required under NFPA 101 (Life Safety Code) to be conducted with what specific characteristic that differs from other occupancy types?
Answer: Conducted without sounding audible alarms, using a defend-in-place strategy
Healthcare facilities use a defend-in-place strategy; drills are conducted without alarming patients, using coded announcements and staff response checks instead.
An assembly occupancy with an occupant load of 600 persons loses power. Which life safety feature is MOST critical to maintain operational status?
Answer: Emergency lighting and exit sign illumination
Large crowds in darkness cannot safely evacuate; emergency lighting and illuminated exit signs are the most immediately life-critical systems during a power failure.
High-rise building fire prevention programs must address the concept of 'stack effect.' This phenomenon is MOST accurately described as:
Answer: Pressure-driven airflow in tall buildings caused by temperature differences that can spread smoke through vertical shafts
Stack effect creates significant vertical pressure differentials in tall buildings, driving smoke into stairwells, elevator shafts, and other vertical openings.
A fire prevention specialist reviewing a manufacturing plant's hot work program should verify that a 'fire watch' is maintained for at least how long AFTER welding operations cease, per NFPA 51B?
Answer: 30 minutes
NFPA 51B requires a fire watch for a minimum of 30 minutes after hot work ends because smoldering materials can ignite into flames well after the heat source is removed.
Which document provides the primary nationally recognized standard for fire prevention in educational occupancies, addressing fire drills, fire alarm systems, and means of egress?
Answer: NFPA 101, Life Safety Code, Chapter 14/15 (Educational Occupancies)
NFPA 101 Chapters 14 and 15 specifically govern new and existing educational occupancies, covering egress, fire drills, and alarm requirements.
A fire prevention program for a covered mall building should specifically address which fire hazard that is unique to this occupancy type?
Answer: Kiosk placement obstructing egress paths and blocking sprinkler coverage
Temporary kiosks in mall common areas frequently obstruct means of egress and can interfere with sprinkler distribution patterns, creating hazards unique to mall configurations.