CFP Site Management 2

Question 1

When a fence installation site has unstable soil conditions, what is the recommended initial step before setting posts?

Accepted Answer

Conduct a soil bearing capacity test

Answer

A soil bearing capacity test identifies the soil's ability to support loads, guiding proper post depth and foundation design.

Question 2

What is the primary purpose of a site survey before beginning a fence installation project?

Accepted Answer

To identify property boundaries, utilities, and obstacles

Answer

A pre-installation site survey establishes property boundaries, locates underground utilities, and identifies physical obstacles that affect the project plan.

Question 3

Which document is typically required before excavating on a commercial fence installation site?

Accepted Answer

An 811 utility locate ticket

Answer

Calling 811 before digging is federally required and triggers utility companies to mark underground lines, preventing dangerous strikes.

Question 4

A crew is installing a fence along a slope. Which layout technique ensures consistent visual appearance despite grade changes?

Accepted Answer

Racked (stepped) fencing

Answer

Racking (or stepping) the fence panels allows them to follow the slope while maintaining consistent post spacing and a uniform look.

Question 5

What is the correct protocol when a job site has an active 811 utility mark that crosses the planned fence line?

Accepted Answer

Hand-dig within 18–24 inches of the mark

Answer

Within the tolerance zone (typically 18–24 inches of utility marks), hand digging is required to avoid damaging buried lines.

(CFP) Certified Fence Professional Practice Test

(CFP) Certified Fence Professional Practice Test

CFP Site Management 2