CFP Gate Hardware & Access Control Systems 1

Question 1

Which type of hinge is most appropriate for supporting a heavy ornamental iron swing gate due to its strength and adjustability after installation?

Accepted Answer

Weld-on heavy-duty adjustable hinge

Answer

Weld-on heavy-duty adjustable hinges are specifically designed to support the weight and stress of heavy ornamental or commercial swing gates and allow post-installation alignment adjustments.

Question 2

A cane bolt (drop rod) on a double swing gate is primarily used to:

Accepted Answer

Secure one leaf in the closed position to provide a latching stop for the active leaf

Answer

A cane bolt drops into a hole in the ground or a receiver to hold one gate leaf stationary, giving the active leaf a solid surface to latch against.

Question 3

Which latch type automatically closes and latches when a gate swings shut and is commonly required by code for pool enclosure gates?

Accepted Answer

Self-latching spring latch

Answer

Self-latching spring latches engage automatically upon gate closure, meeting pool-barrier code requirements that mandate gates latch without manual action to prevent unsupervised child access.

Question 4

On a chain link swing gate, tension bands and carriage bolts are used to:

Accepted Answer

Attach hinges and latches to the gate frame rail

Answer

Tension bands wrap around the gate frame rail and carriage bolts fasten through them to secure hinges and latches directly to the gate frame.

Question 5

When installing a swing gate on sloped terrain, which hinge type allows for vertical height adjustment after the gate is hung?

Accepted Answer

Adjustable offset hinge

Answer

Adjustable offset hinges have a set screw or threaded mechanism that allows the installer to raise or lower the gate after it is hung, accommodating sloped or uneven ground.

(CFP) Certified Fence Professional Practice Test

(CFP) Certified Fence Professional Practice Test

CFP Gate Hardware & Access Control Systems 1