CFP Gate Hardware & Access Control Systems 3

Question 1

Which access control technology uses a microchip and antenna embedded in a card or key fob that communicates wirelessly with a reader to grant gate access?

Accepted Answer

RFID (Radio Frequency Identification)

Answer

Barcode scanning

Answer

Magnetic stripe (magstripe)

Answer

Biometric fingerprint

Question 2

When integrating an access control system with an automatic gate operator, the access control device typically signals the operator to open via:

Accepted Answer

A dry contact relay output (momentary contact closure)

Answer

A high-voltage 240V power circuit connection

Answer

A hydraulic pressure coupling

Answer

A dedicated fiber optic data cable

Question 3

A 'fail-safe' gate lock configuration is defined as a lock that:

Accepted Answer

Unlocks (releases) automatically during a power failure to allow egress

Answer

Remains locked during a power failure to maintain security

Answer

Locks automatically only when the gate reaches the fully open position

Answer

Requires a manual key override at all times regardless of power status

Question 4

A telephone entry system installed at a gated community entrance allows visitors to:

Accepted Answer

Contact a resident who can then remotely release the gate via their phone

Answer

Directly control the gate operator from any remote location

Answer

Bypass all other access credentials in an emergency

Answer

Scan vehicle license plates for automatic identity verification

Question 5

What is the standard power supply voltage for most residential automatic gate operators installed in the United States?

Accepted Answer

120V AC

Answer

12V DC

Answer

24V DC

Answer

240V AC

Question 6

When installing underground electrical conduit for an automatic gate operator, which conduit type is commonly required per the National Electrical Code (NEC)?

Accepted Answer

Rigid PVC Schedule 40 or Schedule 80 conduit

Answer

EMT (Electrical Metallic Tubing) only

Answer

Flexible metallic conduit throughout the entire run

Answer

No conduit is required for low-voltage control wiring

Question 7

A 'fail-secure' lock configuration on a gate means the lock will:

Accepted Answer

Remain locked during a power failure, maintaining the secure state

Answer

Automatically unlock when the gate reaches the open position

Answer

Send an alert to the access control panel when power is lost

Answer

Switch to battery backup to continue normal operation