CFP CFP Tools, Equipment & Maintenance 2

Question 1

When cutting vinyl fence panels, which tool produces the cleanest cut with minimal cracking?

Accepted Answer

Fine-tooth circular saw blade or fine-tooth hand saw

Answer

A fine-tooth blade minimizes vibration and chipping in vinyl, producing a clean cut without cracking the brittle material.

Question 2

What is the purpose of a fence stretcher bar when installing chain-link fencing?

Accepted Answer

It is woven into the chain-link fabric to allow the puller to grip and tension the entire fabric uniformly

Answer

A stretcher bar is inserted through the loops of the chain-link fabric at the end, providing a rigid attachment point so that the fabric can be pulled taut evenly across its full height.

Question 3

Which maintenance task should be performed on pneumatic (air-powered) fence tools before storage?

Accepted Answer

Disconnect the air supply, drain moisture from the compressor tank, and add a few drops of tool oil into the air inlet

Answer

Draining moisture from the compressor tank prevents internal rust, and adding tool oil lubricates internal components to extend pneumatic tool life.

Question 4

An electric wire tensioner is most commonly used when installing which type of fencing?

Accepted Answer

High-tensile smooth or barbed wire fence

Answer

High-tensile wire fences require specific tensioning levels (typically 200–250 lbs) to function correctly, and an electric tensioner helps achieve and verify the correct tension.

Question 5

Which personal protective equipment (PPE) is essential when operating a gas-powered auger to dig post holes?

Accepted Answer

Safety glasses, steel-toed boots, and hearing protection

Answer

Operating a gas auger produces flying debris (requiring eye protection), creates noise (requiring hearing protection), and poses foot/crush risks (requiring steel-toed boots).

(CFP) Certified Fence Professional Practice Test

(CFP) Certified Fence Professional Practice Test

CFP CFP Tools, Equipment & Maintenance 2