Practice Test Geeks(CFP) Certified Fence Professional Practice Test
← All CFP Flashcard Decks

Blueprint Reading & Interpretation Flashcards

7 cards from real CFP practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Blueprint Reading & Interpretation flashcards as text

  1. A fence layout drawing shows bearing 'N 45° E' for a fence run. What does this mean in the field?

    Answer: The fence runs 45 degrees east of due north, or northeast

    A bearing of N 45° E means starting from north and rotating 45 degrees toward the east, resulting in a northeast direction.

  2. When a fence blueprint calls out 'SEE SPEC SECTION 02830,' where would you find the referenced requirements?

    Answer: In the project's written specifications document, section 02830

    Specification sections are separate written documents that accompany the drawings; Section 02830 typically covers chain-link fencing materials and installation standards.

  3. A site plan indicates a 10-foot utility easement running parallel to the property line. How does this affect fence placement?

    Answer: The fence cannot be placed within the easement without utility company approval

    Utility easements grant utility companies rights to access their lines, meaning fence placement within the easement typically requires their written approval.

  4. A cross-section drawing of a fence post shows dimensions labeled 'A,' 'B,' and 'C' with a key. What is the primary purpose of this labeling approach?

    Answer: To allow the same section to describe multiple configurations by varying the keyed dimensions

    Keyed dimension labels let one detail drawing serve multiple post sizes or configurations by listing the actual values for A, B, and C in an accompanying table.

  5. A fence plan notes 'EL = 312.5' next to a corner post. What does 'EL' refer to?

    Answer: Elevation — the height of the post top above a fixed datum

    'EL' stands for Elevation, indicating the vertical height of that point above a fixed reference datum such as sea level or a project benchmark.

  6. A fence drawing includes a 'DO NOT SCALE' warning near the title block. What should an installer do when a dimension is missing from the drawing?

    Answer: Request the missing dimension from the designer or engineer of record

    'Do Not Scale' means drawing reproduction may have distorted dimensions, so any missing or unclear dimension must be obtained directly from the designer.

  7. On a fence permit drawing, a note reads 'ALL WORK SHALL COMPLY WITH IBC AND LOCAL AMENDMENTS.' What does this require of the fence installer?

    Answer: Meet the International Building Code requirements as modified by any local jurisdiction changes

    This note requires the installer to follow the base International Building Code while also applying any more restrictive local amendments adopted by the jurisdiction.