Practice Test Geeks(CFP) Certified Fence Professional Practice Test
← All CFP Flashcard Decks

Blueprint Reading & Interpretation Flashcards

7 cards from real CFP practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Blueprint Reading & Interpretation flashcards as text

  1. A fence detail calls for posts set at 'EQ SP' between two corner posts 48 feet apart with 5 line posts. What is the actual spacing?

    Answer: 8 feet

    Five line posts create six equal spans over 48 feet: 48 ÷ 6 = 8 feet per span.

  2. Which symbol on a site plan most commonly indicates an existing tree to be protected during fence installation?

    Answer: A circle with a trunk dot and radiating lines

    Trees are conventionally shown on site plans as a circle representing the drip line with a small dot at the center for the trunk and radiating lines.

  3. A fence section detail shows 'FG' and 'FF' elevations. What do these abbreviations mean?

    Answer: Finished Grade and Finished Floor

    'FG' means Finished Grade (final outdoor ground level) and 'FF' means Finished Floor, both used as elevation reference points.

  4. On a fence plan, a bold solid line weight is used for fence panels while a thin line is used for property lines. Why does line weight matter?

    Answer: Line weight differentiates the hierarchy and importance of drawing elements

    Line weight hierarchy helps readers instantly distinguish between primary construction elements, reference lines, and secondary information.

  5. A gate detail references 'Sheet A-3, Detail 4.' How do you locate that detail?

    Answer: Turn to drawing sheet A-3 and find the circled or boxed detail labeled 4

    Drawing cross-references use a sheet number followed by a detail number; navigate to sheet A-3 and locate Detail 4 within that sheet.

  6. What does a 'revision cloud' drawn on a fence blueprint indicate?

    Answer: A section of the drawing that was changed after the original issue

    Revision clouds are arced scalloped lines drawn around areas of a drawing that have been modified, helping readers quickly identify what changed between drawing revisions.

  7. A fence specification calls for posts embedded to a depth equal to one-third of the total post length. For a 9-foot post, what is the required embedment depth?

    Answer: 3 feet

    One-third of a 9-foot post equals 3 feet of required embedment depth, leaving 6 feet of post above grade.