CFOT Fiber Optic Standards and Regulations 2

Question 1

The National Electrical Code (NEC) Article 770 specifically regulates which aspect of fiber optics?

Accepted Answer

Installation of optical fiber cables in buildings

Answer

NEC Article 770 covers the safe installation of optical fiber cables, including fire-resistance ratings and routing within buildings.

Question 2

What does the 'OM' classification system define for multimode fiber?

Accepted Answer

Optical Multimode performance categories from OM1 to OM5

Answer

The OM classification (OM1–OM5) defines multimode fiber performance tiers based on bandwidth and supported transmission distances.

Question 3

Which standard defines the OS1 and OS2 categories for single-mode optical fiber?

Accepted Answer

ISO/IEC 11801

Answer

ISO/IEC 11801 defines OS1 and OS2 as performance categories for single-mode fiber used in premises and outside plant applications.

Question 4

What is the minimum bend radius typically specified by TIA-568 for a 2mm fiber optic patch cord under load?

Accepted Answer

25 mm

Answer

TIA-568 specifies a minimum bend radius of 25 mm (about 1 inch) for 2mm fiber optic patch cords under tension.

Question 5

Under NEC Article 770, which cable jacket rating is required for fiber optic cables installed in plenums?

Accepted Answer

OFNP (Optical Fiber Nonconductive Plenum)

Answer

OFNP-rated cables have low-smoke, low-flame jackets required by the NEC for installation in air-handling plenum spaces.

CFOT - Certified Fiber Optic Technician Practice Test