Inspection Procedures & Reporting Flashcards
7 cards from real CFI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Inspection Procedures & Reporting flashcards as text
During an inspection, an inspector notices a fire door is held open with a wooden wedge. Which action is most appropriate?
Answer: Remove the wedge and cite the violation requiring the door to self-close properly
Fire doors must never be blocked or propped open; the inspector should immediately remove the obstruction and cite the violation because this is a life-safety issue.
What information is typically NOT required on a formal fire inspection report?
Answer: Owner's net worth and mortgage balance
Financial information such as an owner's net worth or mortgage balance is irrelevant to fire inspection reporting and is never required on a formal inspection report.
An inspector arrives at a property and is denied access by the owner. What is the correct procedural step?
Answer: Seek an administrative search warrant or court order to gain lawful access
When access is denied, the inspector must obtain an administrative search warrant through the courts to lawfully gain entry, as inspectors cannot forcibly enter without legal authority.
When inspecting means of egress, which condition would immediately disqualify a corridor as a compliant exit access?
Answer: Combustible storage that reduces the required minimum width
Storage or other obstructions that reduce a corridor below its required minimum width create a code violation because adequate egress width is essential for safe evacuation.
Which term describes the process by which an inspector escalates enforcement to the authority having jurisdiction (AHJ) or courts when an owner fails to comply?
Answer: Legal enforcement action or prosecution
When voluntary compliance is not achieved, the inspector escalates to legal enforcement action, which may include fines, criminal prosecution, or court-ordered compliance through the AHJ.
A restaurant kitchen has a Type I commercial hood but no fire suppression system installed. Under NFPA 96, this represents:
Answer: A code violation requiring a fixed fire suppression system
NFPA 96 requires a fixed automatic fire suppression system beneath Type I hoods for cooking equipment that produces grease-laden vapors, regardless of other suppression systems in the building.
What is the significance of the 'inspection interval' in fire inspection scheduling?
Answer: It establishes the maximum time allowed between routine inspections based on occupancy risk
Inspection intervals are risk-based time periods between routine inspections that ensure higher-risk occupancies are inspected more frequently than lower-risk ones.