Inspection Procedures & Reporting Flashcards
7 cards from real CFI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Inspection Procedures & Reporting flashcards as text
When an inspector discovers an imminent hazard during a routine inspection, what is the FIRST action that should be taken?
Answer: Notify the occupant and require immediate corrective action or closure
An imminent hazard poses immediate danger to life and must be addressed on the spot by notifying the occupant and requiring immediate correction or closure of the affected area.
Which document is typically used to formally notify an owner of fire code violations found during an inspection?
Answer: Notice of violation or correction notice
A notice of violation (or correction notice) is the formal document issued to the owner or occupant that identifies violations and establishes a timeframe for compliance.
What is the primary purpose of a re-inspection after violations are cited?
Answer: To verify that previously cited violations have been corrected
A re-inspection is conducted specifically to verify that all violations cited in the original notice have been corrected within the required timeframe.
When documenting conditions during a fire inspection, photographs should be taken from which perspective FIRST?
Answer: Wide angle to establish the overall context and location
Establishing shots from a wide angle should be taken first to document the overall context and location before close-up photos capture the specific deficiency.
Under NFPA 1, which of the following is the inspector's responsibility regarding trade secrets observed during an inspection?
Answer: Maintain confidentiality of proprietary processes while still reporting fire hazards
Inspectors must maintain confidentiality of proprietary or trade secret information observed during an inspection while still fulfilling their obligation to report fire and life safety hazards.
A fire inspector is conducting an inspection of a high-rise office building. At what frequency does NFPA 1 generally recommend inspections for this occupancy type?
Answer: Annually
NFPA 1 generally recommends annual inspections for high-rise office buildings to ensure ongoing compliance with fire and life safety requirements.
Which of the following best describes the purpose of maintaining historical inspection records for a property?
Answer: To identify recurring violations and compliance trends over time
Historical inspection records allow inspectors and authorities to identify recurring violations, non-compliant owners, and systemic issues that may require escalated enforcement.