CFB Blueprint Reading & Interpretation 2

Question 1

On a structural drawing, what does a dashed hidden line typically represent?

Accepted Answer

An edge or feature hidden behind another surface

Answer

Hidden lines (dashed) represent edges or features that exist but are not visible from the current view direction.

Question 2

A plan view drawing of a building is typically a view from which direction?

Accepted Answer

Looking straight down from above

Answer

A plan view is a bird's-eye (top-down) view, showing the layout of a floor or site as seen from above.

Question 3

What does the abbreviation 'TYP' mean when noted on a blueprint?

Accepted Answer

Typical — applies to all similar conditions

Answer

'TYP' (Typical) indicates that the dimension or detail shown applies to all identical or similar conditions on the drawing.

Question 4

On a site plan, contour lines that are spaced close together indicate:

Accepted Answer

Steep slope

Answer

Closely spaced contour lines indicate a rapid change in elevation, meaning a steep slope in that area.

Question 5

Which drawing type shows the internal arrangement of a structure by cutting through it vertically?

Accepted Answer

Section view

Answer

A section view shows the interior of a structure by depicting a vertical cut through the building, revealing internal construction.

(CFB) Certified Field Builder Practice Test