Practice Test GeeksCFA Practice Test
← All CFA Flashcard Decks

OSHA 29 CFR 1910.178 Flashcards

7 cards from real CFA practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 OSHA 29 CFR 1910.178 flashcards as text

  1. OSHA 29 CFR 1910.178 prohibits refueling or recharging forklifts in which of the following areas?

    Answer: Areas near open flames or ignition sources

    Refueling and recharging must not occur near open flames, sparks, or other ignition sources due to the risk of fire or explosion from fuel vapors or hydrogen gas.

  2. According to OSHA 29 CFR 1910.178, what must operators do before leaving a forklift unattended?

    Answer: Lower the forks to the ground and neutralize the controls

    Operators must fully lower the forks, neutralize controls, shut off the engine, and set the brakes before leaving the truck unattended.

  3. Under OSHA 29 CFR 1910.178, when is a forklift considered 'unattended'?

    Answer: When the operator is more than 25 feet from the truck or the truck is out of view

    A truck is considered unattended when the operator is 25 or more feet away from the truck or the truck is no longer in the operator's view.

  4. Which battery charging requirement is mandated under OSHA 29 CFR 1910.178?

    Answer: Charging areas must be equipped with adequate ventilation

    Battery charging areas must have adequate ventilation to disperse hydrogen gas emitted during charging, preventing explosive concentrations.

  5. OSHA 29 CFR 1910.178 requires that trucks traveling in the same direction maintain a safe following distance of approximately:

    Answer: Three truck lengths

    The regulation requires approximately three truck lengths (about 20 feet for each truck) of following distance between traveling forklifts.

  6. According to OSHA 29 CFR 1910.178, which modification to a forklift is prohibited without manufacturer approval?

    Answer: Altering the capacity, stability, or safe operation of the truck

    No modifications or additions that affect capacity or safe operation shall be made without manufacturer's written approval, which may require a new nameplate.

  7. Under OSHA 29 CFR 1910.178, which type of industrial truck designation indicates it is approved for use in areas with flammable vapors?

    Answer: Type EX (Explosion-proof)

    The EX designation indicates explosion-proof trucks approved for use in locations where flammable vapors or dusts are present.