Operator Controls & Dashboard Flashcards
7 cards from real CFA practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Operator Controls & Dashboard flashcards as text
What is the function of the inching pedal on a forklift?
Answer: Allows slow, precise movement while keeping engine RPM high for hydraulic power
The inching pedal partially disengages the transmission so the operator can creep forward slowly while maintaining high engine RPM for hydraulic lift power.
On most forklifts, which color is used for the lift control lever?
Answer: Blue
ANSI/ITSDF standards specify that the lift control lever should be colored blue for standardized identification.
What happens when an operator pulls back on the lift lever?
Answer: Forks raise upward
Pulling back (toward the operator) on the lift lever raises the forks via the hydraulic lift cylinder.
The service brake on a forklift is primarily used to:
Answer: Slow or stop the forklift during normal operation
The service brake (foot brake) is the primary stopping mechanism used during everyday travel and maneuvering.
Which control is used to shift the forks left or right without moving the entire forklift?
Answer: Side-shift lever
The side-shift lever activates the hydraulic side-shift carriage attachment, allowing lateral fork movement for precise load alignment.
On electric forklifts, what does the regenerative braking system do?
Answer: Converts kinetic energy back into battery charge during deceleration
Regenerative braking captures the motor's electrical resistance during deceleration and feeds that energy back into the battery.
What is the purpose of the deadman seat switch on a forklift?
Answer: Cuts drive power and may apply brakes when the operator is not seated
The deadman (operator presence) seat switch detects when the operator leaves the seat and automatically cuts drive power or applies brakes to prevent runaway.