Load Handling & Warehouse Management Flashcards
7 cards from real CFA practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Load Handling & Warehouse Management flashcards as text
What is the proper fork width spacing when picking up a standard pallet?
Answer: Forks spread as wide as the pallet allows for maximum stability
Forks should be spread as wide as the pallet permits to maximize load stability and prevent the pallet from tipping.
When is it permissible to use the forks to push or drag a load along the floor?
Answer: It is never permissible to push or drag loads with forks
Using forks to push or drag loads can damage the forks, the load, and the floor, and is never an approved practice.
What is the purpose of floor load capacity signs posted in a warehouse?
Answer: They specify the maximum weight the floor can safely support
Floor load capacity signs warn operators not to exceed the weight limit the floor structure is engineered to support.
After placing a load in a high rack position, what should the operator do before backing away?
Answer: Ensure the load is fully and securely on the rack before slowly backing away
The operator must confirm the load is stable and fully seated on the rack before backing out to avoid pulling the load with the forks.
What is a 'swing reach' or 'reach forklift' attachment best suited for?
Answer: Placing loads in deep rack storage without repositioning the truck
Reach forklifts extend their forks forward into rack storage without moving the truck, allowing access to deep rack positions in narrow aisles.
What should a forklift operator do if they notice a storage rack is visibly bent or damaged?
Answer: Report it immediately and keep loads away from the damaged rack
Damaged racks must be immediately reported and the area cordoned off, as a compromised rack can collapse under load.
In a multi-shift warehouse, why is it important to complete a load count verification at the start of a shift?
Answer: To identify any loads that may have shifted or become unstable during the previous shift
Loads can shift during a prior shift and checking at shift start ensures no unstable storage situations are inherited unknowingly.