Load Handling & Warehouse Management Flashcards
7 cards from real CFA practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Load Handling & Warehouse Management flashcards as text
What is 'dynamic stability' in forklift operation?
Answer: The stability of the forklift during movement, turns, and acceleration
Dynamic stability refers to how the forklift maintains balance during motion, which is affected by speed, turning, and load position.
Why should operators avoid turning on a ramp or incline?
Answer: It dramatically increases the risk of tipping due to lateral forces
Turning on an incline combines lateral and gravitational forces, greatly increasing the risk of the forklift tipping over.
A load weighs 4,000 lbs and the forklift's rated capacity is 5,000 lbs at a 24-inch load center. The load center is 30 inches. What should the operator do?
Answer: Consult the load capacity chart; the actual safe capacity is likely lower
A greater load center distance reduces safe capacity below the rated figure, so the operator must check the chart before proceeding.
What is a 'dead zone' in warehouse forklift operation?
Answer: A blind spot or area where visibility is severely limited
Dead zones are areas with severely limited visibility, such as intersections or areas blocked by shelving, requiring extra caution.
What is the safest way to handle an oddly shaped load that cannot be easily placed on a standard pallet?
Answer: Use appropriate attachments or blocking and secure the load before moving
Non-standard loads require appropriate attachments or securing methods such as blocking, strapping, or specialized forks before transport.
Which of the following best describes 'dock leveler' safety when loading a trailer?
Answer: Ensure the dock leveler is properly set before driving onto the trailer
The dock leveler must be properly positioned and rated for the forklift's weight before entry to prevent the truck from falling into the gap.
What is the correct procedure when a forklift load begins to feel unstable during travel?
Answer: Stop gradually, lower the load, and re-secure before continuing
Stopping gradually and lowering the load to re-secure it is the safest response to an unstable load during travel.