Label Interpretation and Calculations Flashcards
7 cards from real CFA practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Label Interpretation and Calculations flashcards as text
A label instructs applicators to calibrate equipment before each use. An uncalibrated spreader delivers 20% more product than intended. On a 10,000 sq ft area with a 5 lb/1,000 sq ft rate, how many extra lbs of product are applied?
Answer: 10 lbs
Intended amount = 50 lbs; 20% excess = 10 lbs extra applied.
A fertilizer label contains both 'Caution' and 'Warning' signal words on different sections. Which signal word indicates greater hazard?
Answer: Warning
'Warning' indicates a moderately toxic or irritating product, while 'Caution' indicates the least hazardous category.
An applicator converts a label rate from lbs per acre to lbs per 1,000 sq ft. One acre equals 43,560 sq ft. If the rate is 200 lbs/acre, what is the rate per 1,000 sq ft (rounded to nearest tenth)?
Answer: 4.6 lbs
200 lbs ÷ 43.56 (thousands of sq ft per acre) ≈ 4.6 lbs per 1,000 sq ft.
A fertilizer label requires that gloves be worn during application. Under which label section is this personal protective equipment (PPE) requirement found?
Answer: Precautionary statements / first aid
PPE requirements are listed under the Precautionary Statements section, which also includes first aid instructions.
A 50 lb bag of 15-15-15 fertilizer is applied uniformly across 2,500 sq ft. How many lbs of nitrogen are applied per 1,000 sq ft?
Answer: 3.0 lbs
Total N = 50 × 0.15 = 7.5 lbs; applied over 2.5 thousands of sq ft = 7.5 ÷ 2.5 = 3.0 lbs N per 1,000 sq ft.
A fertilizer label states it is registered for use in California but not in Florida. What does this mean for a Florida applicator?
Answer: The product may not be legally applied in Florida
Fertilizer registration is state-specific; products not registered in a given state cannot be legally sold or applied there.
When a fertilizer label lists 'Slowly Available Nitrogen' separately from 'Water Soluble Nitrogen,' why is this distinction important for applicators?
Answer: The two forms have different burn risks and release timing, affecting rate and timing decisions
Slowly available nitrogen releases over time and poses less burn risk, while water soluble nitrogen acts quickly, so applicators must adjust timing and rates accordingly.