Storage & Transportation of Explosives Flashcards
7 cards from real CES practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Storage & Transportation of Explosives flashcards as text
What is the primary factor used in ATF Quantity-Distance (Q-D) tables to determine required separation distances between explosive magazines and protected structures?
Answer: The quantity of explosive stored
Q-D tables use the net explosive weight (quantity) stored to calculate minimum separation distances from inhabited buildings and other protected structures.
Which federal agency requires all licensed explosives dealers, manufacturers, and importers to maintain records of explosive transactions under the Safe Explosives Act?
Answer: ATF
The Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) administers the Safe Explosives Act and requires licensed handlers to keep transaction records for regulatory oversight.
Under ATF regulations (27 CFR Part 555), how frequently must magazines storing explosive materials be inspected?
Answer: Every 7 days
ATF regulations require magazine inspections at least every 7 days to verify security, inventory accuracy, and proper storage conditions.
Which ATF magazine type is designed for permanent above-ground storage and approved for the largest quantities of high explosives?
Answer: Type I
Type I magazines are heavy-duty, permanently constructed above-ground facilities that meet the highest ATF construction and security standards for storing large quantities of high explosives.
Why must detonators (blasting caps) be stored separately from bulk explosive materials in magazines?
Answer: Their accidental initiation could cause sympathetic detonation of adjacent bulk explosives
Storing detonators separately prevents an accidental cap detonation from triggering a mass detonation of bulk explosives, dramatically reducing the potential consequences of any storage incident.
What DOT hazard class number is assigned to all explosive materials for transportation purposes?
Answer: Class 1
DOT classifies explosive materials under Hazard Class 1, subdivided into Divisions 1.1 through 1.6 based on the specific explosion hazard type.
Which DOT division designation applies to explosives that present a mass explosion hazard, such as dynamite and bulk ANFO?
Answer: Division 1.1
Division 1.1 covers explosives with a mass explosion hazard, meaning detonation of one package can cause near-simultaneous detonation of the entire load, and includes materials like dynamite, TNT, and ANFO.