Certified Welder Welding Positions & Joint Types 2

Question 1

Which welding position is designated as '2F' in AWS terminology?

Accepted Answer

Horizontal fillet weld

Answer

Flat fillet weld

Answer

Vertical fillet weld

Answer

Overhead fillet weld

Question 2

In a T-joint weld, the two base metal pieces are oriented at approximately what angle to each other?

Accepted Answer

90 degrees

Answer

45 degrees

Answer

60 degrees

Answer

180 degrees

Question 3

When welding in the 4G position, the weld axis is oriented how?

Accepted Answer

Horizontal with face down (overhead)

Answer

Horizontal with face up

Answer

Vertical with horizontal axis

Answer

Inclined at 45 degrees

Question 4

Which joint type is formed when two metal pieces are placed end-to-end in the same plane?

Accepted Answer

Butt joint

Answer

Corner joint

Answer

Lap joint

Answer

Edge joint

Question 5

What is the primary challenge of welding in the overhead (4G/4F) position?

Accepted Answer

Preventing molten metal from falling due to gravity

Answer

Maintaining consistent travel speed

Answer

Achieving proper preheat temperature

Answer

Selecting the correct electrode diameter

Question 6

A corner joint is typically used when two pieces of metal meet at what configuration?

Accepted Answer

At their edges forming an L-shape

Answer

Along their flat faces overlapping

Answer

End-to-end in the same plane

Answer

One piece set into a groove of another

Question 7

In pipe welding, the 5G position means the pipe is fixed with its axis in what orientation?

Accepted Answer

Horizontal (axis pointing sideways)

Answer

Vertical (axis pointing up)

Answer

Inclined at 45 degrees

Answer

Flat with axis horizontal and weld rotated