Practice Test GeeksCertified Safety Professional Exam Practice Test
← All CSP Flashcard Decks

Certified Safety Professional (CSP) Flashcards

7 cards from real CSP practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Certified Safety Professional (CSP) flashcards as text

  1. According to ANSI Z10, which element forms the foundation of an Occupational Health and Safety Management System (OHSMS)?

    Answer: Management leadership and employee participation

    ANSI Z10 places management leadership and employee participation as the foundational element driving all other OHSMS components.

  2. Which noise exposure level (dBA TWA) triggers OSHA's requirement to establish a Hearing Conservation Program?

    Answer: 85 dBA

    OSHA's 29 CFR 1910.95 requires a Hearing Conservation Program when workers are exposed to noise at or above an 8-hour TWA of 85 dBA (action level).

  3. In ergonomics, which cumulative trauma disorder is associated with sustained pinching or gripping motions and often affects the tendons of the hand and wrist?

    Answer: Trigger finger (stenosing tenosynovitis)

    Trigger finger results from inflammation of the tendon sheath caused by repetitive gripping motions, causing the finger to catch or lock.

  4. Under the OSHA Lockout/Tagout standard, which energy control procedure step must occur BEFORE an employee attempts to verify zero energy state?

    Answer: Release/restrain stored energy

    Stored energy (capacitors, springs, elevated parts, hydraulic pressure) must be released or restrained before verification to prevent injury during the zero-energy verification step.

  5. A safety professional is using the Job Hazard Analysis (JHA) method. What is the FIRST step in completing a JHA?

    Answer: Select the job to be analyzed

    A JHA begins by selecting the job to be analyzed, typically prioritizing jobs with high injury rates or severe consequences.

  6. According to NFPA 70E, what is the minimum approach boundary where PPE is required to protect against arc flash incident energy?

    Answer: The arc flash boundary

    The arc flash boundary is where incident energy equals 1.2 cal/cm², requiring appropriate PPE for anyone crossing it.

  7. Which type of ventilation system uses a hood to capture contaminants at or near the source before they can disperse into the workroom air?

    Answer: Local exhaust ventilation

    Local exhaust ventilation (LEV) captures contaminants at their source using hoods, ducts, air cleaners, and fans before they enter the worker's breathing zone.