Handling, Transport, and Storage Questions and Answers Flashcards
7 cards from real CER practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Handling, Transport, and Storage Questions and Answers flashcards as text
When should an endoscope be inspected for external damage as part of the transport and handling workflow?
Answer: Before and after each transport
Inspecting before and after transport detects damage that occurred during handling and prevents use of a compromised scope.
What does SGNA guidance state about the use of absorbent foam or padding inside endoscope transport containers?
Answer: Foam should be used to cushion but must be kept dry and clean
Absorbent foam provides cushioning but must be kept dry and clean; wet or soiled foam becomes a contamination source.
A storage cabinet for processed endoscopes should be located in an area that is:
Answer: In a clean, low-traffic area with controlled access
Clean, low-traffic areas with controlled access minimize the risk of environmental recontamination of processed endoscopes.
Which type of endoscope accessory must NEVER be stored inside the endoscope channel during transport or storage?
Answer: Cleaning brushes
Cleaning brushes should never remain in channels as they can cause internal damage and harbor residual contamination.
What is the correct response when an endoscope is found to have moisture visible inside the channel after storage?
Answer: Remove from service and reprocess before use
Visible moisture in a stored channel indicates an incomplete drying process; the scope must be fully reprocessed before it is safe for patient use.
Which factor most directly affects the maximum safe storage duration of a high-level disinfected flexible endoscope?
Answer: Storage environment conditions and container integrity
Storage duration is primarily determined by environmental controls (humidity, temperature, traffic) and whether the container remains intact and contamination-free.
When a facility implements a scope tracking system using barcodes or RFID, which transport-related data point is MOST critical to capture?
Answer: Time-stamped location transitions from soiled to clean areas
Time-stamped location data creates an auditable chain of custody showing where the scope was at each stage, supporting traceability and outbreak investigation.