CEP Quantity Takeoff & Measurement 2

Question 1

In quantity takeoff, board feet (BF) is the standard unit for measuring which material?

Accepted Answer

Lumber and timber products

Answer

Board feet is the traditional US unit for lumber and timber, defined as a piece equivalent to 1 inch thick × 12 inches wide × 12 inches long in volume.

Question 2

Which of the following best describes the 'net quantity' approach in a construction takeoff?

Accepted Answer

Measuring only the actual installed quantity without waste allowances

Answer

Net quantity measures the exact installed amount without waste or overage; waste factors are then applied separately to arrive at the purchase quantity.

Question 3

What is the standard industry unit for measuring roofing shingle quantities in a quantity takeoff?

Accepted Answer

Square (100 SF)

Answer

Roofing materials are measured in 'squares,' where one square equals 100 square feet of coverage area, which is the industry standard unit for roofing.

Question 4

When calculating steel reinforcing bar (rebar) quantities, what unit is most commonly used for purchasing and pricing?

Accepted Answer

Pounds (LB) or tons

Answer

Rebar quantities are first calculated by length and then converted to weight (pounds or tons) because steel is purchased and priced by weight in the industry.

Question 5

What is the purpose of a 'quantity survey' or 'material schedule' in the takeoff process?

Accepted Answer

To compile and organize all measured quantities by trade or work section

Answer

A quantity survey compiles and organizes all measured quantities by trade, CSI division, or work section, making pricing, review, and scope management more efficient.

(CEP) Certified Estimating Professional Practice Test

(CEP) Certified Estimating Professional Practice Test

CEP Quantity Takeoff & Measurement 2