CENWAT Flue Requirements & Pressure Relief 6

Question 1

What is 'CE marking' significance for gas boilers sold in the UK post-Brexit?

Accepted Answer

CE marking (or UKCA marking for GB market) demonstrates conformity with relevant product safety regulations including the Gas Appliances Regulation

Answer

CE (and now UKCA for the GB market) marking confirms the boiler meets relevant product safety requirements. For gas appliances, this includes compliance with the Gas Appliances Regulation, confirming safe design and construction.

Question 2

What does the Gas Appliances Regulation (formerly Gas Appliances Directive) require?

Accepted Answer

All gas appliances placed on the market must be safe, fit for purpose and correctly labelled, with conformity assessed before sale

Answer

The Gas Appliances Regulation requires gas appliances to be safe, fit for purpose and accompanied by instructions; manufacturers must carry out conformity assessment and apply the CE/UKCA marking before placing appliances on the market.

Question 3

In a room-sealed boiler, what prevents wind from causing dangerous over-pressure in the combustion chamber?

Accepted Answer

The pressure-balanced design of the concentric terminal, where wind affects air inlet and flue outlet equally

Answer

The concentric terminal design exposes both the air inlet and flue outlet to the same wind conditions, so pressure is balanced and wind does not create a net positive or negative pressure on the combustion system.

Question 4

What is the consequence of insufficient combustion air supply to an open-flued gas appliance?

Accepted Answer

Incomplete combustion leading to carbon monoxide production, sooting and potentially dangerous CO levels in the room

Answer

Insufficient combustion air causes incomplete combustion, producing toxic carbon monoxide (CO) gas, sooting of the heat exchanger and combustion chamber, and potentially dangerous CO levels in the occupied space.

Question 5

What is the function of the overheat thermostat (high limit stat) in a boiler?

Accepted Answer

To shut down the boiler if the primary flow temperature exceeds a safe limit, preventing damage and scalding

Answer

The overheat (high limit) thermostat is a safety device that cuts off the gas valve if the boiler water temperature exceeds a safe limit, typically 90–95°C, protecting the boiler and system from damage.

ACS CENWAT Practice Test

ACS CENWAT Practice Test

CENWAT Flue Requirements & Pressure Relief 6