Practice Test Geeks(CEI) Certified Electrical Inspector Practice Test
← All CEI Flashcard Decks

Electrical Code & Standards Flashcards

9 cards from real CEI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 9 Electrical Code & Standards flashcards as text

  1. What is the purpose of the National Electrical Code (NEC)?

    Answer: Set safety standards for installations

    The National Electrical Code (NEC) is a comprehensive set of safety standards for electrical installations. Its primary purpose is to safeguard persons and property from hazards arising from the use of electricity, such as fires and electric shock. Adherence to the NEC ensures that electrical systems are installed safely and reliably, promoting public safety.

  2. Which organization publishes the NEC?

    Answer: NFPA

    The National Electrical Code (NEC) is published by the National Fire Protection Association (NFPA). The NFPA is a global non-profit organization dedicated to eliminating death, injury, property, and economic loss due to fire, electrical, and related hazards. They develop and publish over 300 consensus codes and standards, including the NEC, to promote safety.

  3. What does Article 110 of the NEC cover?

    Answer: Equipment installation requirements

    Article 110 of the National Electrical Code (NEC) covers general requirements for electrical installations. It outlines fundamental principles such as the examination and approval of equipment, working space around electrical equipment, and identification of disconnecting means. This article ensures that all electrical equipment is installed safely and accessibly for maintenance and operation.

  4. Which NEC article covers Grounding and Bonding?

    Answer: Article 250

    Article 250 of the National Electrical Code (NEC) is specifically dedicated to Grounding and Bonding. This article outlines the comprehensive requirements for establishing effective grounding and bonding systems, which are critical for electrical safety. Proper grounding and bonding protect against electric shock, lightning, and overcurrent conditions by providing a safe path for fault currents.

  5. What is a GFCI and where is it required?

    Answer: Shock protection device in wet areas

    A GFCI (Ground-Fault Circuit Interrupter) is a crucial safety device designed to protect people from electric shock by quickly detecting imbalances in electrical current and shutting off power. GFCIs are specifically required in wet areas, such as bathrooms, kitchens, garages, and outdoors, where the risk of electrocution is higher. Their rapid response prevents serious injury or death from ground faults.

  6. What is the minimum wire gauge for household branch circuits?

    Answer: 14 AWG

    For general-purpose household branch circuits, the minimum wire gauge permitted by the National Electrical Code (NEC) is 14 AWG (American Wire Gauge). This wire size is typically used for 15-ampere circuits, which power most standard outlets and lighting fixtures. Using a smaller gauge wire for these circuits would pose a fire hazard due to overheating.

  7. What must be done before beginning electrical inspections?

    Answer: Verify power is off

    The absolute first and most critical safety step before beginning any electrical inspection is to verify that the power to the circuits being inspected is completely off. This prevents accidental electrocution or injury to the inspector and others. Following proper lockout/tagout procedures ensures a safe working environment and is paramount in electrical safety protocols.

  8. How often is the NEC updated?

    Answer: Every three years

    The National Electrical Code (NEC) is updated on a regular cycle to incorporate new technologies, address emerging safety concerns, and reflect changes in electrical practices. The NFPA revises and publishes a new edition of the NEC every three years. This ensures the code remains current and effective in promoting electrical safety and preventing hazards.

  9. What is a primary focus during electrical inspections?

    Answer: Code compliance and safety

    The primary focus during electrical inspections is to ensure code compliance and safety. Inspectors meticulously check that all electrical installations adhere to the National Electrical Code (NEC) and other applicable safety regulations. This rigorous examination prevents hazards like fires, shocks, and equipment damage, ultimately safeguarding occupants and property.