Practice Test Geeks(CEI) Certified Electrical Inspector Practice Test
← All CEI Flashcard Decks

Code Violation Documentation Flashcards

7 cards from real CEI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Code Violation Documentation flashcards as text

  1. What is the primary purpose of maintaining a chain of custody for violation documentation evidence?

    Answer: To ensure evidence integrity and admissibility if the case proceeds to legal or administrative hearings

    Chain of custody preserves evidence integrity so it remains admissible and reliable in enforcement proceedings or hearings.

  2. An inspector finds multiple violations during a single site visit. How should they be documented?

    Answer: Document each violation separately with its own code citation, location description, and required correction

    Each violation must be individually documented with specific code citations and correction requirements for clarity and enforcement tracking.

  3. Which of the following is an example of an 'imminent hazard' that would require immediate action documentation beyond a standard notice?

    Answer: Energized exposed conductors accessible to building occupants

    Energized exposed conductors that occupants can contact represent an immediate risk of electrocution, requiring emergency documentation and action.

  4. When an inspector issues a violation for improper grounding electrode conductor sizing, which NEC table is referenced?

    Answer: NEC Table 250.66

    NEC Table 250.66 specifies the minimum size of grounding electrode conductors based on the service entrance conductor size.

  5. What must be included in violation documentation when work was performed without a required permit?

    Answer: Citation for unpermitted work, requirement to obtain a permit and potentially expose previously covered work for inspection

    Unpermitted work documentation must require a retroactive permit and may require uncovering concealed work to verify compliance.

  6. A violation notice references 'AHJ approval required.' What does this mean for the contractor?

    Answer: The specific installation method or material requires pre-approval from the Authority Having Jurisdiction before proceeding

    Certain non-standard methods or materials require explicit AHJ approval under NEC 90.4, which must be documented before the work can continue.

  7. How long are electrical inspection violation records typically required to be retained by the AHJ?

    Answer: The duration specified by state or local record retention laws, commonly 3–10 years or the life of the structure

    Record retention periods vary by jurisdiction but typically follow state or local laws ranging from several years to the life of the building.