Jobsite Safety Procedures Flashcards
7 cards from real CEA practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Jobsite Safety Procedures flashcards as text
What does the acronym 'GFI' or 'GFCI' stand for in electrical safety?
Answer: Ground Fault Circuit Interrupter
GFCI stands for Ground Fault Circuit Interrupter, a device that shuts off power when it detects current leaking to ground.
An extension cord on a construction site is found to have a damaged outer jacket exposing the inner insulation. The correct action is to:
Answer: Remove it from service immediately and tag it as defective
Damaged extension cords must be removed from service immediately to prevent shock or fire hazard.
When using a ladder to access an elevated work area, the ladder must extend at least how far above the landing?
Answer: 3 feet
OSHA requires ladders to extend at least 3 feet above the upper landing to provide a handhold for workers stepping on or off.
Which type of fire extinguisher is appropriate for an electrical fire?
Answer: Class C
Class C extinguishers use non-conductive agents and are rated for electrical fires involving energized equipment.
Before beginning work in a confined space, workers must ensure the atmosphere is tested for which conditions?
Answer: Oxygen content, flammable gases, and toxic contaminants
OSHA requires testing confined spaces for oxygen deficiency/enrichment, flammable gases, and toxic air contaminants before entry.
Which of the following is an example of an administrative control for jobsite hazards?
Answer: Rotating workers to limit exposure time
Administrative controls change how work is performed, such as rotating workers to limit exposure duration.
What is the correct procedure when a worker finds an unlabeled container of liquid on a jobsite?
Answer: Treat it as hazardous and contact the site supervisor for identification
Unlabeled containers must be treated as potentially hazardous and reported to a supervisor for proper identification under OSHA's HazCom standard.