Practice Test Geeks(CDT) Certified Drafting Technician Practice Test
← All CDT Flashcard Decks

Industry Standards & Compliance Regulations Flashcards

7 cards from real CDT practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Industry Standards & Compliance Regulations flashcards as text

  1. Which ASME standard governs dimensioning and tolerancing practices used in engineering drawings?

    Answer: ASME Y14.5

    ASME Y14.5 is the standard that establishes uniform practices for dimensioning and tolerancing in engineering drawings.

  2. What does the term 'datum' refer to in ASME Y14.5?

    Answer: A theoretically exact point, axis, or plane used as a reference for measurements

    A datum is a theoretically exact geometric reference (point, axis, or plane) from which measurements and tolerances are established.

  3. When a drawing references ANSI/ASME standards, who is typically responsible for ensuring the drawing conforms to those standards?

    Answer: The checker or approving engineer

    The checker or approving engineer is responsible for verifying that drawings conform to the referenced standards before release.

  4. Which organization publishes the standards commonly used for architectural drawing practices in the United States?

    Answer: AIA (American Institute of Architects)

    The AIA publishes standards and guidelines for architectural drawing practices and construction document production.

  5. ISO 128 is an international standard that addresses which drafting topic?

    Answer: General principles of presentation in technical drawings

    ISO 128 establishes general principles for the presentation of technical drawings including line types, views, and sections.

  6. What is the purpose of a title block revision table on an engineering drawing?

    Answer: To document changes made to the drawing after initial release

    A revision table records all changes made to a drawing after its initial release, including revision letter, description, date, and approver.

  7. Under ASME Y14.100, what is the primary purpose of an engineering drawing?

    Answer: To serve as the definitive product definition conveying all requirements for manufacture and inspection

    ASME Y14.100 defines engineering drawings as the authoritative product definition used to communicate all requirements for manufacturing and inspection.