CDL Air Brake - Commercial Driver's License Air Brakes Parking Brake System Questions and Answers

Question 1

What provides the force to apply the parking brakes in a vehicle equipped with an air brake system?

Accepted Answer

Large, powerful springs located in the brake chambers.

Answer

Parking brakes, also known as spring brakes, use the mechanical force of powerful springs to apply the brakes. Air pressure is used to hold these springs back (caged) during normal driving. When the driver pulls the parking brake control, air is released, and the springs expand to apply the brakes.

Question 2

A driver pulls the yellow, diamond-shaped knob on the dashboard to park the vehicle. What is happening within the air brake system?

Accepted Answer

Air pressure is being released from the spring brake chambers, allowing the springs to apply the brakes.

Answer

The yellow, diamond-shaped knob is the parking brake control valve. Pulling this knob out releases the air pressure that holds the powerful parking brake springs in the 'caged' or released position. With the air pressure exhausted, the springs expand and mechanically apply the brakes.

Question 3

Which of the following conditions will cause the spring brakes to apply automatically?

Accepted Answer

Air pressure in the main system drops to a low level, typically in the 20-45 psi range.

Answer

Spring brakes are a critical safety feature. If there is a significant leak and the air pressure in the reservoirs drops to a critically low level (typically between 20 and 45 psi), the parking brake control valve will automatically pop out, releasing the remaining air pressure and causing the spring brakes to apply.

Question 4

Some vehicles are equipped with a control lever on the dash that allows the driver to apply the spring brakes gradually. What is this control called?

Accepted Answer

A modulating control valve.

Answer

A modulating control valve allows the driver to control the application of the spring brakes, typically through a lever on the dash. This provides a 'feel' for the braking action and allows for a controlled stop if the service brakes fail.

Question 5

A driver is operating a combination vehicle and needs to park. What is the correct procedure for using the parking brakes?

Accepted Answer

Apply the parking brakes for both the tractor and the trailer.

Answer

When parking any vehicle, especially a combination vehicle, the parking brakes on all units should be applied to secure the entire vehicle safely. The yellow knob applies the tractor parking brakes, and the red knob (trailer air supply) applies the trailer emergency/parking brakes.

CDL Air Brake - Commercial Driver's License Air Brakes Test Practice Test

CDL Air Brake - Commercial Driver's License Air Brakes Test Practice Test

CDL Air Brake - Commercial Driver's License Air Brakes Parking Brake System Questions and Answers