CDL Air Brake - Commercial Driver's License Air Brakes Foundation Brakes and Parts Questions and Answers

Question 1

Which of the following are the three main types of foundation brakes used on vehicles with air brake systems?

Accepted Answer

S-cam, disc, and wedge brakes

Answer

The three common types of foundation brakes are S-cam, disc, and wedge brakes. S-cam brakes are the most common type of drum brake found on heavy commercial vehicles.

Question 2

During a pre-trip inspection of S-cam brakes, you pull on the slack adjuster and find it has more than one inch of free play. What does this most likely indicate?

Accepted Answer

The brakes are out of adjustment.

Answer

If a slack adjuster on an S-cam brake system moves more than approximately one inch where the pushrod attaches, it is an indication that the brakes are likely out of adjustment and need to be serviced. This is a critical safety check, as out-of-adjustment brakes are a common violation found during roadside inspections.

Question 3

What is the primary function of the S-cam in a foundation brake system?

Accepted Answer

To force the brake shoes apart and against the brake drum.

Answer

When the brakes are applied, the slack adjuster rotates the camshaft. The 'S' shape at the end of the camshaft, the S-cam, pushes against rollers on the brake shoes, forcing them apart and into contact with the brake drum to create friction and slow the vehicle.

Question 4

A driver is operating a truck with automatic slack adjusters. What is the correct procedure for ensuring they are working properly?

Accepted Answer

Check that the pushrod travel does not exceed the limit when pulling on it by hand; if it does, it indicates a problem.

Answer

For automatic slack adjusters, the driver's role is to inspect, not manually adjust. During a pre-trip inspection with the brakes released, the driver should pull firmly on the pushrod. If it moves more than about one inch, it indicates a potential problem with the adjuster or foundation brakes that needs attention from a mechanic. Manually adjusting an automatic slack adjuster can mask underlying issues.

Question 5

Which component in a drum brake assembly converts the linear motion of the brake chamber pushrod into rotary motion to apply the brakes?

Accepted Answer

Slack adjuster

Answer

The slack adjuster is the mechanical lever that connects the brake chamber's pushrod to the camshaft. Its primary functions are to transform the linear force of the pushrod into the twisting or rotary motion of the S-cam and to provide a way to adjust for lining wear.

CDL Air Brake - Commercial Driver's License Air Brakes Test Practice Test

CDL Air Brake - Commercial Driver's License Air Brakes Test Practice Test

CDL Air Brake - Commercial Driver's License Air Brakes Foundation Brakes and Parts Questions and Answers