CDL Air Brake - Commercial Driver's License Air Brakes Dual Air Brake Systems Questions and Answers

Question 1

What is the primary safety advantage of a dual air brake system?

Accepted Answer

It provides braking capability even if one of the two systems fails.

Answer

A dual air brake system is designed with two separate, independent systems. If one system develops a major leak or fails, the other system is isolated and can still provide enough braking force to bring the vehicle to a safe stop.

Question 2

A driver is operating a vehicle with a dual air brake system. The low air pressure warning light and buzzer activate. What is the minimum pressure remaining in the system for this to occur?

Accepted Answer

Before pressure drops below 60 psi

Answer

The low air pressure warning light and buzzer must come on before the air pressure in either the primary or secondary system drops below 60 psi. This gives the driver an early warning of a potential issue with the air supply.

Question 3

When conducting a pre-trip inspection on a dual air brake system, what is the minimum air pressure the compressor should build in both the primary and secondary systems before driving?

Accepted Answer

100 psi

Answer

Before driving, you must allow the air compressor to build up a minimum of 100 psi in both the primary and secondary systems. This ensures sufficient pressure is available for normal braking operations.

Question 4

In a typical dual air brake system on a two-axle truck, how are the two systems usually split?

Accepted Answer

One system operates the front axle, and the other operates the rear axle.

Answer

Typically, the primary system operates the brakes on the rear axle(s), and the secondary system operates the brakes on the front axle. This separation ensures that if one system fails, the other can still provide braking on at least one axle.

Question 5

While driving a truck with a dual air brake system, a failure occurs in the primary system. Which of the following is the most likely outcome?

Accepted Answer

Stopping distance will be increased, and the secondary system will still provide braking.

Answer

If one of the air systems in a dual system fails (e.g., the primary system), the other system (secondary) is unaffected and will continue to operate the brakes on its axle(s). However, with only half of the service brakes working, the vehicle's total stopping distance will increase.

CDL Air Brake - Commercial Driver's License Air Brakes Test Practice Test

CDL Air Brake - Commercial Driver's License Air Brakes Test Practice Test

CDL Air Brake - Commercial Driver's License Air Brakes Dual Air Brake Systems Questions and Answers