CDA Risk Assessment & Mitigation 3

Question 1

A decorative artist must work on scaffolding at 12 feet. Which risk mitigation measure is MANDATORY under OSHA general industry standards?

Accepted Answer

Install guardrails, mid-rails, and toe boards on all open sides

Answer

OSHA 1926.502 requires guardrail systems on scaffolds to prevent falls from heights above 10 feet.

Question 2

Which SDS (Safety Data Sheet) section contains the most relevant first-aid measures for accidental eye contact with a decorative medium?

Accepted Answer

Section 4 – First-Aid Measures

Answer

Section 4 of the SDS specifically details first-aid procedures for each route of exposure, including eye contact.

Question 3

When spraying water-based decorative finishes, which risk is often underestimated compared to solvent-based products?

Accepted Answer

Mold growth risk from high humidity and overspray on porous surfaces

Answer

Water-based overspray raises ambient humidity, promoting mold growth in porous wall or ceiling materials if not allowed to dry properly.

Question 4

A decorative artist experiences dizziness while applying a shellac-based finish. The FIRST mitigation action should be:

Accepted Answer

Immediately move to fresh air and alert a coworker

Answer

Dizziness signals solvent overexposure; the immediate priority is removing the person from the exposure source and seeking fresh air.

Question 5

Which hazard assessment must be completed BEFORE power-washing a decorative mural exterior for touch-up prep?

Accepted Answer

Evaluate wind speed for overspray drift, proximity of electrical outlets, and bystander exclusion zones

Answer

Power-washing near structures introduces electrical hazard from wet outlets, water drift risk to bystanders, and operator slip risk — all must be assessed.

(CDA) Certified Decorative Artist Practice Test

(CDA) Certified Decorative Artist Practice Test

CDA Risk Assessment & Mitigation 3