CDA Faux Finishing & Special Effects Techniques 3

Question 1

When applying metallic foil leaf as a decorative special effect, the adhesive used to secure the foil to the surface is called:

Accepted Answer

Size (gilding size)

Answer

Gesso

Answer

Shellac

Answer

Bonding primer

Question 2

A decorative artist is asked to create a 'trompe l'oeil' (trick the eye) effect. Which of the following best describes what this technique achieves?

Accepted Answer

A realistic three-dimensional illusion painted on a flat surface

Answer

A flat, abstract geometric pattern

Answer

A texture created with dimensional plaster

Answer

A repeating stenciled border design

Question 3

Which type of glaze is most appropriate for achieving a translucent, jewel-tone effect in a faux stained glass technique on a window?

Accepted Answer

Transparent glass paint or leading paint

Answer

Exterior latex paint thinned with water

Answer

Standard acrylic craft paint

Answer

Oil-based enamel paint

Question 4

To create a realistic aged patina on a new terra cotta pot using faux techniques, a decorative artist would typically:

Accepted Answer

Layer washes of gray, white, and earthy tones with dry-brushing and antiquing glaze

Answer

Apply thick coats of glossy varnish

Answer

Coat with high-gloss metallic gold paint

Answer

Apply only a single flat black coat

Question 5

In a decorative finish using a 'stippling' technique, what is the primary motion used with the stippling brush?

Accepted Answer

A pouncing or dabbing motion perpendicular to the surface

Answer

Long smooth horizontal strokes

Answer

Circular scrubbing motions

Answer

Diagonal dragging strokes

Question 6

A decorative artist is creating a dimensional texture on a wall using joint compound. To protect the dried texture and allow painting over it, the artist should apply:

Accepted Answer

A shellac or PVA primer sealer to prevent the paint from soaking in unevenly

Answer

A coat of wax before painting

Answer

Water directly to the dried compound before painting

Answer

A layer of clear topcoat before the base coat

Question 7

When a decorative artist applies an 'antiquing' glaze to a painted furniture piece to simulate age, the glaze is typically worked into which areas of the surface?

Accepted Answer

The recesses, crevices, grooves, and carved details

Answer

The flat open center panels and broad surfaces

Answer

The topmost raised edges and corners

Answer

Only the back and underside of the piece