CCT Safety Standards & Regulatory Compliance 5

Question 1

Under EPA Section 608, which activity requires EPA-certified technicians even when no refrigerant is expected to be released?

Accepted Answer

Attaching manifold gauges to a system containing a regulated refrigerant

Answer

Attaching gauges constitutes opening an appliance and is considered refrigerant handling, requiring EPA Section 608 certification even if no release is planned.

Question 2

Which standard establishes refrigerant concentration limits in occupied spaces to protect against asphyxiation and toxicity?

Accepted Answer

ASHRAE Standard 34

Answer

ASHRAE Standard 34 establishes refrigerant safety classifications and exposure limits including ATEL and RCL values used to protect occupants.

Question 3

A technician working in a confined space must perform an atmospheric test before entry. Which gases must be checked at minimum?

Accepted Answer

Oxygen level, flammable gases, and toxic contaminants

Answer

OSHA's permit-required confined space standard (29 CFR 1910.146) requires testing for oxygen content, flammable gases, and toxic atmospheres before entry.

Question 4

Which organization administers the EPA Section 608 technician certification examinations through approved testing organizations?

Accepted Answer

The U.S. Environmental Protection Agency (EPA)

Answer

The EPA administers the Section 608 certification program by approving third-party testing organizations to administer the exams and issue certification cards.

Question 5

When disposing of a small appliance such as a household refrigerator, which EPA Section 608 rule applies?

Accepted Answer

Refrigerant must be recovered by a certified technician or the appliance must go to an approved recycler

Answer

Even small appliances require refrigerant recovery either by a certified technician or by a retailer/landfill using approved recovery equipment before disposal.

(CCT) Certified Casper Technician Practice Test

(CCT) Certified Casper Technician Practice Test

CCT Safety Standards & Regulatory Compliance 5