CCT - Certified Cardiographic Technician Resting ECG Procedures Questions and Answers 1

Question 1

A CCT is preparing a patient for a resting 12-lead ECG. The patient has a hairy chest. Which of the following is the most appropriate action for the technician to take?

Accepted Answer

Shave the hair at the specific electrode placement sites with patient consent.

Answer

To ensure good electrode-to-skin contact for a high-quality ECG tracing, any hair at the site of electrode placement should be removed. Shaving is the standard procedure, but it requires the patient's permission before proceeding.

Question 2

While performing a resting ECG, the technician notices a thick, uniform, and fuzzy baseline, characteristic of 60-cycle interference. What is the most likely cause of this artifact?

Accepted Answer

There is electrical interference from nearby equipment.

Answer

A 60-cycle (or AC) interference artifact presents as a thick, consistent, fuzzy baseline. It is caused by electromagnetic interference from nearby electrical devices, such as power cords, patient beds, or mobile phones.

Question 3

A patient is in the supine position for a resting ECG. Where should the V4 electrode be placed?

Accepted Answer

In the 5th intercostal space, at the mid-clavicular line.

Answer

Correct placement of the precordial leads is crucial for an accurate ECG. The V4 electrode is specifically placed in the 5th intercostal space in the middle of the clavicle (mid-clavicular line).

Question 4

A technician observes a 'wandering baseline' on the ECG tracing, where the isoelectric line slowly moves up and down. Which of the following is a common cause of this artifact?

Accepted Answer

Patient's respiratory movements.

Answer

A wandering baseline is often caused by patient movement, including the rise and fall of the chest during normal breathing. It can also be caused by poor electrode contact or loose electrodes.

Question 5

To obtain a standard 12-lead ECG, how many electrodes are placed on the patient?

Accepted Answer

10

Answer

A standard 12-lead ECG provides 12 different views of the heart's electrical activity, but it is recorded using only 10 electrodes: four limb electrodes (one on each arm and leg) and six precordial (chest) electrodes.

CCT - Certified Cardiographic Technician Exam Practice Test

CCT - Certified Cardiographic Technician Exam Practice Test

CCT - Certified Cardiographic Technician Resting ECG Procedures Questions and Answers 1